NFC vs QR Codes: Which Is Better for Your Business?
NFC tags and QR codes compared on speed, phone support, cost, durability, updates, accessibility and security, and why many businesses should simply use both.
Neither is better everywhere. QR codes cost almost nothing to print and work with the camera of almost any smartphone. NFC tags are faster at close range, need no aiming and can be rewritten. For most businesses the best setup is both: an NFC tag with a printed QR code next to it, both leading to the same link.

NFC vs QR code: side by side
| NFC tag | QR code | |
|---|---|---|
| Speed | Hold the top of the phone to the tag, then tap the notification. No aiming, works in the dark. | Open the camera, aim, keep the code in view, then tap the link. Needs some light. |
| Phone support | iPhone XS / XR and later read link tags without an app. iPhone 7, 8 and X need an app or the NFC Tag Reader in Control Center. Not every phone has NFC. | Almost any smartphone camera. The iPhone Camera reads QR codes without an extra app. |
| Cost per piece | A chip and an antenna: typically well under a few euros or dollars per tag | Only printing, almost free on material you already print |
| Durability | Can sit under a laminate or a thin non-metal cover. Data lasts about 10 years (NTAG21x). On metal, use on-metal tags. | As good as the print. Scratches, dirt, glare and fading make it harder to scan. |
| Updating content | Rewrite on site, about 100,000 times, unless the tag is locked | Reprint, unless the code leads to a page you can edit |
| Accessibility | No aiming needed, but people must find the tag. Mark the spot clearly. | Can be scanned from further away if printed large. Aiming the camera can be hard for some people. |
| Security | Can be locked or password-protected against overwriting, but can still be covered by a fake sticker | Cannot be overwritten, but a fake printed code is easy to stick on top |
When an NFC tag is the better choice
- People are within reach. Tables, counters, shelves, reception desks and doors. A tap is quicker than opening the camera and aiming.
- You want a clean design. A tag can sit behind your logo or a small "Tap here" mark, so the sign does not need a large black-and-white square.
- The content changes. You can rewrite a tag on site, as long as it is not locked.
- You need many numbered items. Rooms, tables or equipment can each get their own link, for example yourshop.example/table/12. The TagForge batch writer writes a numbered series such as #001 to #100, verifies each tag and skips tags that are already written.
- Android guests need your Wi-Fi. Android phones can join a network by tapping a Wi-Fi tag. iPhone needs an app to read the Wi-Fi record, and then iOS asks "Join network?".
When a QR code is the better choice
- People are far away. Posters, shop windows, screens and signs. Nobody can tap a tag that is 3 m (10 ft) away.
- You print in large numbers. Flyers, packaging, receipts and letters. Adding a QR code to something you already print costs almost nothing.
- You want to reach every phone. Phones without NFC, and iPhone 7, 8 and X without background reading, can all scan a QR code with the camera.
- iPhone guests need your Wi-Fi. The iPhone Camera understands a Wi-Fi QR code without any app.
- The surface is metal. Metal detunes normal tags, so you would need on-metal tags. A printed code works on metal.
Why using both is often the best answer
A tag and a printed QR code on the same sign cover everyone. People with NFC tap, and everyone else scans. Because both lead to the same page, you maintain only one link.
How to set it up:
- Choose one link on your own domain, for example yourshop.example/menu. Avoid link shorteners: they hide the destination, and careful customers and link checkers treat them as a warning sign.
- Optional: add a source marker, such as ?src=nfc on the tag and ?src=qr in the QR code. Your website statistics then show which one people use. Keep the link short: an NTAG213 holds a link of about 130 characters.
- Write the tags. In TagForge, the size meter shows whether the content needs an NTAG213, 215 or 216, and Verify after writing reads each tag back. For many tables, use the batch writer with a number placeholder.
- Print the QR code next to the tag, with the short address in text below it, so people can type it or compare it with what their phone shows.
- Add a clear instruction, such as "Tap the top of your phone here or scan the code". The NFC antenna of an iPhone is at the top edge, so mark exactly where the tag is.
- Protect the tags before they go public: lock them, or set a write password. See how to lock or password-protect an NFC tag.
- Test with real phones: an iPhone XS or later with the screen on, and a camera scan of the QR code.
The same idea works for guest Wi-Fi, with two codes: a Wi-Fi tag for Android phones and a Wi-Fi QR code for iPhones. See how to share your Wi-Fi with an NFC tag. On NFC business cards, a QR code printed on the back helps people whose phones do not read the tag. Write a link to an online contact page rather than a contact record, because iPhone needs an app to read contact records from a tag.
Security: the same risk for both
The main real-world risk is the same for NFC and QR: sticker swaps. Someone places a fake tag or printed code over or next to yours, and it leads to a phishing payment page. Neither a tag nor a QR code can hack a phone by itself. Both only hand over a link, so the danger is the page and what customers type on it. Our guide on how to spot fake NFC and QR stickers covers the details.
What you can do:
- Protect your tags. A locked or password-protected tag cannot be overwritten. It can still be covered, so the next points matter too.
- Make your link easy to recognise. Use your own domain and https, avoid shorteners, and print the address in text.
- Tell customers where to pay, for example "Pay only at the counter or in our app". A fake "pay here" sticker then looks wrong.
- Check your signs every day, for example when you open. Look for stickers on top, and scan a few tags with TagForge to confirm they still open your link. Its Link Shield checks links from tags, or any link you paste, for warning signs such as raw IP addresses, plain http and link shorteners, entirely on the iPhone.
FAQ
Should I use NFC or a QR code for a restaurant menu?
Use both. Put an NFC tag and a printed QR code on each table sign, both leading to a menu page you can edit. Guests with NFC tap, and everyone else scans.
Do all phones have NFC?
No. On iPhone, apps can use NFC from iPhone 7 onward, and iPhone XS / XR and later read link tags without an app. Not every other phone has NFC. A QR code works with almost any smartphone camera.
Can I change what an NFC tag or QR code opens?
You can rewrite an NFC tag unless it is locked. A QR code is printed, so you have to reprint it. The easy way for both: link to a page on your own website and change that page instead.
Is NFC more secure than a QR code?
Only a little. A tag can be locked so nobody can overwrite it, but both can be covered by a fake sticker. The best protection is a recognisable link, daily checks and clear payment instructions.